View Darren Duke's profile on LinkedIn
Admin

Darren Duke Blog Zone

belnapi.exe errors in BackupExec for Domino

Darren Duke  July 5 2008 04:39:50 PM
Ever since STS and some clients upgrade to 12d to allow of R8 compatibility, we have been plagued by failed backups. Anyway after moving some of the internal STS servers around this weekend I decided to do some investigations.

From the posts on this forum https://forums.symantec.com/syment/board/message?board.id=be12_lotus&thread.id=4 I changed the registry per instructed and I am at last able to back up Domino fully again and no more belnapi.exe errors in the Domino console.

In short:
On the Domino servers:
 
HKLM\Software\Symantec\Backup Exec For Windows\Backup Exec\Engine\DOMINO
 
Changed Enable Change Journal to 0
Changed Enable Notes Databse Filtering to 0
 
Restarted services...

Comments

Gravatar Image  1Colin Williams  7/13/2008 6:13:15 PM  belnapi.exe errors in BackupExec for Domino

Good stuff Darren, thanks for sharing.

I had similar problems here with a brand new install of Domino 7.0.2 FP2 and BE12d SP1.

The fix above looks to have fixed it.

Gravatar Image  2Darren Duke  7/15/2008 6:45:24 AM  belnapi.exe errors in BackupExec for Domino

@1, I should have also mentioned that I still occassionally see the error on the Domino console but it still works, and the frequency of the error is significantly reduced.

Something else worth pointing out is when you update BackupExec on the server, remember to update any remote agents too.

    NOTE: - Email, name and subject are required, otherwise I'll have to approve the comment.....